Search
Close this search box.

Are Snow Tubes the Same As River Tubes

An outdoor activity known as tubing involves riding atop a donut- or biscuit-shaped tube. Although it is possible to tube through the air, snow and water are the most popular surfaces. Hence, the commercial tubes we most frequently see are snow tubes and river tubes.

What are the Commons Between Them ?

In general, snow and river tubes have a lot in common. Both types of tubes are usually inflatable with a hole in the middle, made of sturdy materials with welded seams against blowouts, used for sports or recreational activities, and depending on size, can hold a number of passengers or riders. Their shapes are not limited to round, since they can be sled-like, lounge-style, or heptagonal. Most of them are also equipped with a single or two tow points for pulling behind a boat or sled, as well as support handles and cup holders. They stand out for their unique qualities just as much as they are intended for unique reasons.

What are the Difference Between Them ?

Because of their numerous features and the risks of using them, it is important that you learn enough about this equipment, and knowing their differences is simply one way of carrying this out. There just might be slight variations between the two types, but they are still significant to discuss, especially if you plan to go snow tubing and river tubing. It could save you from troubles.

The materials utilized, the building method, and the manufacturer’s design distinguish snow tubes from river tubes. The materials used to make these tubes, especially the bottom surface that has the major contact with the surfaces, namely crystalline (for snow tubing) and liquid (for river tubing), should be made of special materials that will slide and thrive under the existing conditions. And just like any other ride equipment out there, the tubes have also to have materials that provide comfort and safely accommodate the prospective rider.

The Bottom is Different

For snow tubes, a glossy, heavy-duty, slick vinyl or urethane bottom is common. On the other hand, river tubes’ bottom materials are reinforced, PVC mesh floor and its covering could be a denier polyester or double-stitched nylon. These materials, especially the reinforced and heavy-duty ones, are carefully chosen for the bottom of the tubes because they are resistant to tearing, punctures, and abrasions. They contribute to the rider’s cozy moment and striking experience. For instance, the snow tube’s vinyl or urethane bottom can boost speed by reducing friction, while the mesh floor provides comfort and protection from debris like rocks and tree limbs.

Distinctions in the Design And Construction

As to the overall design, the river tubes could be made of heavy-duty and hypoallergenic materials and tough urethane, or vinyl and PVC inner chamber protected by a denier cover that is improved through reinforcement. Besides considering the buoyancy of the product and its endurance to UV light and chlorine exposure, river tubes are also structured in a way that a rider could paddle and maneuver into the water. Contrary to its name, river tubes are not exclusive to lazy rivers, natural river floats, or rapids. They are also used in pools and chutes.

Snow tubes are slightly different. They have the slick and thick rubber material or a durable vinyl PVC that ensures the tube’s long life, strength, and suppleness in the expected environment. This just can be easily affected by any foreseeable damage, such as clumps and ice that may have sharp edges, so manufacturers need surface materials to counter the effects of these on the tubes. That is why their design also comes with a snow-worthy cover such as a high-molecular-weight polyethylene plastic that has above-average impact strength and remarkable resistance to damage such as cold crack.

As mentioned, tubes have welded seams, if applicable. Actually, they undergo permanent seam welding, and sometimes, they are even double welded. There are tubes with an opening in the middle, allowing the rider to dangle their feet by getting to the tube’s lowest point. And thanks to a closed center because some tubes can feature a flat deck surface. Others also include armrests and backrests.

Snow and River Tubes Use Different Types of Valves

Having said all this and with the fact that our tubes are typically inflatable, we should not forget the probably unseen part that does significant work to make our equipment alive—the air valves! Normally, the valves of snow tubes and river tubes could be similar to that of trucks and boats, respectively, and it is simple to see why. But any valve is used as long as it is compatible with the design materials and if it helps for better inflation and compression of the tube

So, Can We Use River Tubes for Snow Tubing or Snow Tubes for River Tubing ?

The major reason a river tube has a mesh bottom is that the bottom should allow water to pass through it. Other than a mesh bottom, manufacturers can also use any other specification that offers instant drainage. Otherwise, the rider will clear the water every time water enters the tube. But if you use a river tube with a mesh bottom in the snow, it is analogous to you grating and digging into the snow. That would gradually and then abruptly bring the tube’s velocity to zero!

Snow tubes, however, can resist below-freezing conditions. That’s a feature that river tubes do not have. They are made of a synthetic polymer material with a special additive formulated to withstand the anticipated temperature. The synthetic polymers of a river tube are not intended to replace the tubes for snow tubing because they become less supple and more susceptible to damage in freezing weather. If river tubes are adaptable since it can be used across different water surfaces, snow tubes are also adaptable in a way that they might be used on a river as long as they have bottoms where water can pass through.

It should be reiterated that each tube is constructed from unique aims, which accounts for their minor differences. Therefore, choosing the appropriate tube for a particular environment is essential if you want to get the most out of tubing and keep yourself safe from avoidable problems and accidents.

Also, no matter what kind of tube you are using, carrying a patch kit, an air pump, and even an extra tube could save you in case something goes wrong while tubing over places that distance you very far from potential help. Inflatables could be resilient and robust for their well-built structure, but they are not given perfect shielding power. There will always be rocks or jagged edges of ice, so watch those out.

Some people may become notoriously hard-headed in using this to that for convenience even if it’s inappropriate. That could lead them to trouble. Hence, you should always know what tube to pick up by answering the question, “what type of medium or surface will I be riding on?” You could never go wrong with that.

Lastly, it’s a good place to end that the tubes, either for snow or river, are at their best in everything when properly inflated. So, take all the precautionary measures and then enjoy tubing!

Where to Buy Snow Tube & River Tube

After we have a detailed understanding for them, i think you may want to get one for your kids and families. Winflatable is a professional manufacturer for snow tube & river tube in China. we are also a OEM factory for many famous brands on the world. There are many different kinds of these products for your option. Also buying from us can enjoy a very cheap factory price.

winflatable factory
Contact Us Now

Send Us Your Requirements

You will have our reply within 12 hours